In NSW, electrical wiring work must be done by, or under the supervision of, a licensed electrician. A handyman or general maintenance worker is not authorised to replace a power point, alter wiring or work on a switchboard, however small the job looks. The licence check takes a couple of minutes and is the most important thing to do before accepting a quote.
What Makes an Electrician Properly Licensed?
An electrical licence shows the holder meets the requirements for specified electrical work. Both the person doing the work and the business contracting for it need credentials suited to their roles, and some jobs carry extra accreditation or supervision requirements. The NSW Government’s electrical licensing information confirms that wiring work needs a suitable licence regardless of the project’s cost.
Why Unlicensed Electrical Work Is Dangerous
A faulty connection can appear to work while creating a serious risk behind a wall or inside equipment. Poor protection, damaged insulation and incorrect wiring can cause shocks, overheating and fires, and unlicensed work can leave you with compliance, insurance and liability problems if something goes wrong. Fixed wiring is never a DIY job, and a low quote doesn’t make unauthorised work acceptable.
Six Checks Before You Hire
- Check the licence. Ask for the licensee’s name or number and look it up on the Service NSW licence checker.
- Match the credentials to the work. Household wiring and electricity network connections are different scopes.
- Ask about relevant experience. The contractor should understand the type of switchboard, building or supply issue involved.
- Compare written quotes like for like. Check what is included, excluded and subject to further approval.
- Confirm insurance and paperwork. Ask what cover, test records and completion documents come with the job.
- Agree timing and communication. Understand planned outages, access and what happens if hidden faults are found.
The cheapest quote may omit important work and the dearest isn’t automatically best. The useful comparison is between providers qualified for the same clearly defined scope. For example, one quote might list new protective devices, circuit testing, labelling and the expected outage, while another just says “switchboard upgrade” for less. The second may be legitimate, but you can’t tell whether it covers the same work until you ask about the equipment, excluded rewiring and what happens if a fault is found.
When Level 2 Accreditation Is Also Needed
Some jobs involve the service connection between the property and the distribution network. That work needs a provider with Level 2 ASP accreditation and authorisation from the network operator, and an ordinary electrical contractor licence doesn’t cover it. Examples include connecting or disconnecting a service line, repairing an overhead or underground service connection, some private pole and point of attachment defects, and the network side of certain supply upgrades.
Ordinary rewiring or light installation is not Level 2 work. How the levels differ is explained in what an accredited service provider is. For a quote that includes a supply connection, make sure it says who arranges distributor approval and whether another authorised provider is involved.
What a Written Quote Should Explain
A good quote names the parts of the installation being worked on, the testing expected, the materials, any power interruption, and how variations will be agreed. If network approval is needed it should say who arranges it. Keep agreed changes in writing.
Documents You Should Receive
For electrical wiring work, a Certificate of Compliance for Electrical Work (CCEW) must be submitted through the Building Commission NSW eCert portal, which has been mandatory since 1 July 2026, within seven days of the electrical test. Ask for a copy, plus any test records and an invoice that matches the agreed scope. An invoice alone does not replace compliance documentation where a certificate is required. Insurance, a licence and a workmanship guarantee are three separate things, so ask for each in writing, and keep the records for future renovations or a property sale.
Warning Signs Before You Approve a Job
- The person won’t say which licensed contractor is responsible.
- They suggest skipping required testing or approvals.
- The scope is vague but you’re asked to pay immediately.
- They claim every type of network authorisation without evidence.
- They offer unsafe temporary wiring as a long-term fix.
- They promise a full replacement before inspecting the installation.
Hiring for Strata or Commercial Premises
These sites often have several switchboards, common-property equipment, restricted access and occupants who need notice of outages. Ask who coordinates with the building manager and tenants, how planned shutdowns and essential equipment are handled, and what documentation is provided. The licence requirement is the same, but scheduling and communication are usually more involved than for a small residential repair.
Frequently Asked Questions
Can a handyman legally replace a wall power point in NSW?
No. Electrical wiring work requires the appropriate licence or certificate, and a quick job is not exempt.
How do I verify a Level 2 electrician?
Check the electrical licence, then confirm the ASP level, class and distributor authorisation for the specific work.
Do I need a Level 2 electrician for a switchboard upgrade?
Not always. Many upgrades are ordinary licensed electrical work. Level 2 is needed when service-side or network equipment is affected.
Can I accept a quote without a site inspection?
Some simple jobs can be priced from good information, but hidden faults, older boards or incoming connection work often need an inspection. Ask which assumptions could change the price.
Does a business with great reviews still need a licence check?
Yes. Reviews describe customer experiences, while the live licence record confirms credentials and any restrictions.
What if an electrician finds more unsafe wiring during the job?
Ask for a clear explanation of the hazard and the proposed fix. Immediate risks need safety action, and extra non-urgent work should be documented and approved before it goes ahead.
Can a licensed electrician arrange a Level 2 provider for me?
Often, yes, when a project involves both internal wiring and a supply connection. Confirm in writing who is responsible for each stage.
Get the Right Credentials for Your Job
Whether it is a fault inside the house or a problem at the supply connection, the first step is knowing which credentials the work needs. IZCO Electrical covers general electrical work and, as a Grade A ASP, Level 2 connection work across Sydney. Contact IZCO Electrical or phone 0470 123 811.
