Private Power Pole Installation, Repair & Replacement Services Sydney
Power Pole Installation, Repair & Replacement Services
IZCO Electrical is an expert in overhead lines and power pole installation/ replacement. IZCO Electrical is an accredited level 2 electrician. we supply and install both timber and galvanised steel power poles, performing comprehensive replacements, installations, and repairs across Sydney.
Private Power Pole Installation & Replacement in Sydney
If you require, you can get a private power pole installed close to your property, which is your private electricity source. At IZCO Electrical, we supply, install, connect and maintain timber and galvanised steel private power poles. Some property owners prefer the look of a private electrical pole as it eliminates the view of annoying cables from the front area of your house.
If you need private pole installation, replacement or repair service, touch base with the specialist Level 2 electrician in Sydney on 0470 123 811 for a prompt response and speedy service. We operate electrical services 24×7 and can help you with your emergency power pole replacement.
Why should you install Private Power Poles?
- Private power poles give you the flexibility to position your electricity source in the preferred space around your home. Once a private power pole is installed, the electric poles then transfer the electricity to the switchboard and then across the property.
- Besides, the street’s network pole remaining connected to the home may be riskier, thus, a private power pole is recommended.
- The cables from the network pole to the home would block trees, roads and walkways. The private power pole can curtail the number of wires required. This will create a safer environment for the street and the properties.
- If your private power pole has become too old, then a new private power pole needs to be installed removing the existing one. Thus, you’ll need a private power pole replacement service.
Different Types Of Private Power Poles!
Timber and galvanised steel are the two main types of private power poles that you can install onto a property. For installation and continued usage, both private power pole types come with their unique benefits and drawbacks. And it is up to the homeowner and his/her personal choice that determines which private power pole is installed or replaced.
Timber Private Power Pole
Timber private power poles can last for 20 to 25 years or more and so they are costlier than steel. Timber private power poles give a natural look to the property. Made from plywood, these power poles are non-conductive and safer for the surrounding area. For drawbacks, termites can damage timber poles, and the likelihood increases if you’re living in a coastal area where active termite mounds are close by. If a timber pole is installed in an area that experiences high moisture levels, then the timber can decay easily. Nonetheless, the rain won’t cause the timber to mould as the poles are designed to dry quickly. Timber poles are considerably larger than steel poles and won’t look good on some properties. They can be more noticeable and can hinder at times.
Galvanised Steel Power Pole
Galvanised steel private power poles can last for 10 to 15 years. Nowadays, galvanised steel private power poles are increasing in popularity. All the cabling is stored within the pole and is not exposed. Thus, galvanised steel power poles look more aesthetically appealing than timber poles. Besides, they are smaller in size and more cost-effective. Nonetheless, once the layer of zinc wears away, corrosion can form and start to decay the metal. This process will further speed up if you’re living in a place near saltwater.
How Do We Install & Replace Power Poles?
Here is how we install and replace private power poles:
- Examine the area and make sure it is clear from vegetation and that it can be connected to the electrical network and property via the point of attachment.
- Disconnect the power.
- Remove the old power pole safely.
- For installing the new power pole, drill a hole. Install a new power pole.
- Connect to the electrical network.
Experienced Level 2 Electrician in Sydney
We follow strict standards to ensure safe and long-lasting electrical work.
Licensed and Insured Level 2 Electricians
Our electricians are accredited and insured for both residential and commercial work.
Cost-Effective Pricing
At IZCO Electrical, we offer cost-effective rates with top-notch quality on every project.
Timely and Reliable Service
We value your time and guarantee on-time service delivery according to project schedules.
Round-the-Clock Emergency Electrician
Urgent electrical problems demand swift action. You can rely on IZCO Electrical for timely assistance – Call us at 0470 123 811.
Know What To Do If You See a Downed Power Line
If you experience a fallen power line, you need to follow the below-mentioned:
- Make sure you remain a minimum of 8 metres away from the low-hanging or downed line or any objects that are in contact with the line.
- Be aware that electricity can emit out from its point of contact. If you stand closer than the recommended 8 metres, you’re vulnerable to being electrocuted through the ground from the potential difference.
- Avoid touching the line or any object in contact with it. Trees and fences are common items that may conduct electricity when in contact with a downed line.
- Always assume the line is live and report any immediate safety hazards to the electricity network.
Refrain from attempting repairs yourself, and never move objects around down power lines yourself. If there is a danger to life, you should rather call an emergency Level 2 electrical contractor such as IZCO Electrical for all repairs and installations at the earliest.
We are your reliable emergency electrician service partner, 24 X 7 on-call.
What to Expect?
A risk assessment and site evaluation will highlight if there are any dangers or critical underground infrastructure close by and a plan to drill holes for the power poles is accordingly made. After the hole is dug and prepared, the pole is set into the ground by tamping the approved blue metal compound into the ground. Typically, poles are set between 1.2m and 3m deep per the height of the pole and the composition of the ground it is set into.
Lifetime Workmanship Warranty
When you choose IZCO Electrical, you’re backed by a lifetime warranty on all electrical installations and repairs. We stand by the quality of our work, and in the rare case something goes wrong, you’re fully protected. As licensed and fully insured electricians, we focus on getting the job done properly the first time.
If you’re after reliable electrical work in Sydney, give us a call on 0470 123 811 or book online today.
Why Choose Us To Install Or Replace A Private Power Pole in Sydney?
When you want to install or replace a private power pole or perform maintenance services on a private power pole, you should call in a Level 2 electrician only. IZCO Electrical is an accredited Level 2 service provider authorised with Endeavour Energy and Ausgrid and can install or replace private power poles, or perform emergency repairs on private power poles. If you want a free quote on your private power pole installation or replacement, call us at IZCO Electrical on 0470 123 811. We are a level 2 electrician servicing Sydney!
Your Trusted Partner for Level 2 Electrical Services
IZCO Electrical offers all types of level 2 electrical services, including emergency electrician for repairs, power pole installation or replacement, power line overhead/ underground replacement. Our electrical services have covered your every requirement.
Glance over the services we offer:
Consumer Mains Repair
Excavation Underground Powerline
Our Projects
What Our Customers Say About IZCO Electrical
Areas We Serve in Sydney
Providing specialised Level 2 electrical solutions to residential and commercial properties from North Sydney to the Northern Beaches.
Frequently Asked Questions
Is there anything I can do myself to maintain my private power pole?
Service providers carry out inspections regularly and while all maintenance to private power poles and electricity supplies must be carried out by a licensed Level 2 electrician, there are a few minor maintenance tasks you can do yourself. These can include:
- Remove vegetation from the base of the poles and keep trees clear of overhead power lines.
- Besides, regularly check for broken strands of wire, loose or damaged insulators, and broken or damaged poles.
If you notice any issues to maintain a safe, reliable power supply to your home, contact IZCO Electrical on 0470 123 811 right away!
Whose responsibility is it to repair power poles?
Depending on the location of a power pole, the concerned person will be responsible for repairing the power poles. For instance: –
- If the power poles are located on the street, then it is the responsibility of the power supplier.
- If the power pole is positioned on your property, after the point of supply, then it is the responsibility of the homeowner to make sure they are maintained, repaired and replaced as required.
What is a private power pole?
A private power pole is a property’s power source. It is connected to a property through the street’s electrical network and the point of attachment.
Is it possible to position a private power pole anywhere on my property?
There is a standard for placing private power poles on a property. The first private power pole or “A pole” should be positioned within 1m of the property’s front. Any subsequent power poles can be positioned within the boundary as required.
Do I need council approval for installing a private power pole?
In most Sydney suburbs, you don’t need approval for a replacement, but new installations might require compliance checks. IZCO Electrical can manage all necessary documentation and safety clearances.
Do I need council approval to install a private power pole on my property?
In most cases, installing a private power pole requires a “Section 72” or “Section 77” application from your local council, as well as approval from the network provider (Ausgrid/Endeavour). We handle all the necessary paperwork and compliance checks to ensure your installation is fully legal and safe.
How much does it cost to install a private power pole?
The cost of a new galvanized steel private power pole typically ranges from $799 to $999, depending on the size. Installation and connection costs can vary between $2,300 and $5,300. If you’re unsure which pole type best fits your budget, our Level 2 electricians are here to assist you in making the right choice.
What are the types of power poles in NSW?
Types of power poles in NSW include:
- Private Power Pole
- Network Pole
- Temporary Builder’s Power Pole
- Lead in Pole
- Lighting Pole
- And Telecommunications Pole
Who can install private power poles?
Well, only licensed level 2 ASP electricians can perform private power pole repairs, installations and replacements. Level 2 electricians are specially trained to work directly on a street’s electricity network compared to ordinary electricians.
How long do private power poles last?
Timber poles generally last 15–25 years, while galvanised steel poles can exceed 30 years with proper maintenance. Regular inspections by IZCO Electrical help extend the lifespan and ensure safety.
What are the signs my private power pole needs replacing?
Leaning poles, visible rust, cracks, or termite damage are indicators. If you notice any of these, call IZCO Electrical immediately to prevent electrical hazards.
Which areas do you service for power pole installation?
We provide comprehensive power pole installation services across Sydney. Our operations are managed from three key locations to ensure fast response times: our Headquarters in Marsfield Office, and branches at Seaforth Office, and Frenchs Forest Office. Contact the branch nearest to you for a site assessment.