How much energy do Australian businesses use, and what does it mean for a Sydney office manager? The answer depends on whether you mean electricity alone or all energy, one building or the whole commercial and services sector. Many published figures combine electricity, gas and other fuels, so comparing totals without checking the definition is misleading.
This guide explains the official data, why offices differ from warehouses and retail premises, and how to use your own records to plan sensible upgrades.
The Latest Official Figures
The Australian Bureau of Statistics (ABS) reports that the commercial and services sector used 577 petajoules (PJ) of net energy in 2023–24, up 3.2% on the previous year. In the same release industry used 4,711 PJ (down 0.1%) and households 980 PJ (down 3.4%). These figures cover energy across fuels, so 577 PJ is not a measure of office electricity alone.
Source: ABS Energy Account, Australia, 2023–24. It was the latest release when this article was last reviewed in October 2026, so check for a newer edition before quoting it.
What Counts as Commercial and Services?
The sector covers far more than office towers: retail, accommodation, professional services, education, health and public administration. A sector total can’t be presented as the energy used by Australian office buildings. Typical loads differ by building type:
- Offices: lighting, computers, lifts, ventilation, heating and cooling
- Retail: lighting, refrigeration, air conditioning and display systems
- Health and education: ventilation, specialised equipment and long operating schedules
- Hospitality and accommodation: hot water, cooking, laundry and cooling
Businesses in the same industry can still have very different profiles because their hours, floor area and building systems differ. National statistics give context, and measured consumption on your site should drive decisions.
Electricity Use vs Energy Use
Electricity on a bill is measured in kilowatt-hours (kWh). Energy statistics also use gigajoules and petajoules to cover several sources, and one PJ equals one million gigajoules. A generation figure for the National Electricity Market is not office demand either, because it covers many customers and excludes some Australian systems. The Australian Energy Statistics are a good starting point for official trends.
Why Offices Differ So Much
Two Sydney offices of the same size can have very different bills. One runs weekday hours in an efficient building with modern lighting, while another has servers, long hours and older cooling.
Heating, ventilation and air conditioning. Often a major load, especially in hot weather. System type, maintenance, insulation, orientation and thermostat schedules all matter, and servicing or control changes can beat buying a bigger unit.
Lighting and occupancy. Demand depends on fitting number, lamp technology, hours and use of daylight or occupancy controls. LED retrofits can pay off where fittings are inefficient, and how to calculate LED savings uses real wattages and operating hours.
Computers and specialist equipment. Workstations, server rooms and kitchens add load. A business can have a high peak demand even when annual consumption is moderate, and a demand assessment is different from looking at total kWh.
Using the Numbers for a Building Audit
National figures show trends. A building audit starts with your own data:
- Collect at least a year of bills or interval meter data, with billing periods.
- Separate total kWh from peak demand charges or readings if your tariff has them.
- Note opening hours, seasons, major equipment and unusually busy periods.
- Inspect lighting, air conditioning, control schedules and electrical distribution for practical improvements.
- Ask a qualified professional to assess loads, safety and feasibility.
- Compare measured results after changes instead of assuming a saving was achieved.
Normalise for time, occupancy or floor area where appropriate. Consumption per square metre can be informative but isn’t a universal efficiency score.
Efficiency and Electrical Safety Are Different Questions
A building can have a high bill and safe wiring, or a modest bill and equipment that needs repair. Efficiency analysis looks at energy use, while an electrical inspection looks at condition, protection, capacity and compliance. If ageing equipment or new loads raise safety questions, the warning signs of a failing switchboard show when to inspect, and capacity is a separate matter from consumption, as single-phase vs three-phase power explains. IZCO provides commercial electrical services in Sydney for assessments and works. Work that touches the network service connection is a separate matter needing Level 2 accreditation.
What Sydney Businesses Can Improve First
- Review control schedules so lighting and cooling don’t run after hours.
- Investigate persistent equipment faults before replacing working equipment.
- Compare LED replacements using measured wattage, light quality and real hours.
- Assess capacity before adding major machinery.
- Ask whether future renovations need new circuits, board changes or more supply.
The aim is to find worthwhile site-specific actions, not promise a uniform saving. Retailer offers, network tariffs, equipment condition and occupancy all affect the result.
Common Mistakes With Energy Statistics
- Using total electricity generation to represent the commercial sector.
- Assuming commercial and services figures refer to offices alone.
- Comparing years when classifications or methods have changed.
When you publish a statistic, state its source, period, geography, unit and definition. The ABS 577 PJ figure is net energy used by the broad commercial and services sector across fuels, and shouldn’t be restated as office electricity.
Frequently Asked Questions
How much energy did the commercial and services sector use in 2023–24?
The ABS reports 577 PJ of net energy use. This includes fuels other than electricity and businesses other than offices.
Does Australia publish one annual office electricity total?
Datasets define sectors, fuels and buildings differently. Check the scope of each publication before assuming a sector total measures offices alone.
What is the difference between kWh and PJ?
kWh is the unit on an electricity bill, while a petajoule is a much larger unit of energy used in national statistics. Neither is a rate or tariff.
Does a high bill mean my switchboard must be upgraded?
No. High consumption may reflect hours and equipment. A board upgrade depends on safety, condition, capacity and planned work, which need a separate assessment.
Can LED lighting lower an office’s electricity use?
Potentially. A reliable estimate uses fitting wattage, number of fittings, hours and your current costs.
Are commercial figures the same in every state?
No. Climate, business activity and energy systems vary, so a national figure shouldn’t be presented as a Sydney or NSW average.
When is Level 2 work relevant to a business upgrade?
When the project affects specified connection equipment or the incoming service. Routine lighting and internal circuits don’t need it.
Plan Around Your Own Building’s Data
Industry statistics give context, but decisions should rest on your premises’ own demand. IZCO Electrical assists with commercial electrical works across Sydney, including connection work as a Grade A ASP. Share your building type, equipment and planned upgrades through the contact page or phone 0470 123 811.
